John Deere 420

(0 votes, average: 0.00 out of 5)
3-Point Hitch
Rear type 0 (optional)
Control -
Rear lift 640 lbs [290 kg]
Front hitch -
Front lift -
Power Take-off (PTO):
Rear PTO independent
Clutch electric
Rear RPM 2000
Front PTO independent
Engine RPM -
Capacity
Fuel 6.5 gal [24.6 L]
Dimensions & Tires
Wheelbase 52 inches [132 cm]
Weight 993 lbs [450 kg]
Front tire 18x8.50-8
Rear tire 26x12.00-12
John Deere 420 Power:
Engine gross -
Engine max -
Mechanical
Chassis 4x2 2WD
Differential lock standard
Steering hydrostatic power
Brakes differential mechanical drum
Trailer brakes -
Cab Open operator station.
Hydraulics
Type 0 (optional)
Rear valves -
Mid valves -
Pump flow hydrostatic powe
SCV flow -
Total flow -
Electrical
Ground negative
Charging system alternator
Charging amps 20
Charging volts -
Battery
Number 1
Cold-cranking amps -
Volts 12
Engine Detail
The B48G was the original engine on the Deere 420, used through the 1986 model year.
Onan B48G
gasoline
2-cylinder
air-cooled opposed-twin
781 cc [47.7ci ]
Engine specifications
Bore/Stroke 3.25x2.875 inches [83 x 73 mm]
Emissions -
Emission control -
Rated Power -
Maximum Power -
Air cleaner foam and paper
Pre-heating -
Compression -
Fuel system -
Rated RPM 3500
Operating RPM -
Torque -
Torque RPM -
Starter -
Starter volts 12
Oil capacity 1.75 qts [1.7 L]
Oil change -
Coolant capacity -
Sundstrand 90
Type hydrostatic
Gears infinite (2-range) forward and reverse
Clutch -
Speeds  
John Deere 420 Tires
Ag front 4.80x4.00-8
Ag rear 23x10.50-12
Standard tires (ag) -
Dimensions
Weight (operating) -
Weight (max capacity) -
Front axle load -
Rear axle load -
Wheelbase 52 inches [132 cm]
Length 77 inches [195 cm]
With hitch Length: -
Width 51.5 inches [130 cm]
Height (hood) -
Height (cab) -
Front axle -
Rear axle -
Height (exhaust) -
Clearance (front axle) -
Clearance (rear axle) -
Clearance (drawbar) -