Challenger MT225B

(0 votes, average: 0.00 out of 5)
3-Point Hitch
Rear type I
Control -
Rear lift 1190 lbs [539 kg]
Front hitch -
Front lift -
Power Take-off (PTO):
Rear PTO independent
Clutch electro-hydraulic wet disc
Rear RPM 540 (1.375)
Front PTO -
Engine RPM -
Capacity
Fuel 6.6 gal [25.0 L]
Dimensions & Tires
Wheelbase 59.8 inches [151 cm]
Weight 1609 lbs [729 kg]
Front tire 6-12
Rear tire 9.5-16
Challenger MT225B Power:
Engine gross 22.5 hp [16.8 kW]
Engine max -
Mechanical
Chassis 4x4 MFWD 4WD
Differential lock mechanical rear
Steering hydrostatic power
Brakes wet disc
Trailer brakes -
Cab Two-post fixed ROPS.
Hydraulics
Type I
Rear valves 2*Optional
Mid valves 2*Optional
Pump flow hydrostatic powe
SCV flow -
Total flow 8.1 gpm [30.7 lpm]
Electrical
Ground negative
Charging system alternator
Charging amps 40
Charging volts -
Battery
Number 1
Cold-cranking amps 435
Volts 12
Engine Detail
Iseki E3312
diesel
3-cylinder
liquid-cooled
68.5 ci [1.1 L]
Engine specifications
Bore/Stroke 3.08x3.07 inches [78 x 78 mm]
Emissions -
Emission control -
Rated Power -
Maximum Power -
Air cleaner dry
Pre-heating glow plugs
Compression -
Fuel system indirect injection
Rated RPM 2600
Operating RPM -
Torque -
Torque RPM -
Starter -
Starter volts 12
Oil capacity 2.9 qts [2.7 L]
Oil change -
Coolant capacity 7.5 qts [7.1 L]
Type hydrostatic
Gears infinite (2-range) forward and reverse
Clutch -
Speeds With 9.5-16 R1 rear tires.
Challenger MT225B Tires
Ag front 6-12
Ag rear 9.5-16
Standard tires (ag) -
Dimensions
Weight (operating) -
Weight (max capacity) 3086 lbs [1399 kg]
Front axle load 1433 lbs [650 kg]
Rear axle load 1653 lbs [749 kg]
Wheelbase 59.8 inches [151 cm]
Length 102 inches [259 cm]
With hitch Length: -
Width 39.4 inches [100 cm] *Minimum width.
Height (hood) -
Height (cab) -
Front axle Flange: 34.58 inch length [878 mm]
Rear axle Flange: 33.62 inch length [853 mm]
Height (exhaust) -
Clearance (front axle) -
Clearance (rear axle) -
Clearance (drawbar) -