Challenger MT485D

(0 votes, average: 0.00 out of 5)
3-Point Hitch
Rear type III/II
Control -
Rear lift 11400 lbs [5171 kg]
Front hitch -
Front lift -
Power Take-off (PTO):
Rear PTO independent
Clutch -
Rear RPM 540/1000
540/540E/1000
540/540E/1000/1000E
Front PTO -
Engine RPM -
Capacity
Fuel 64 gal [242.2 L]
Dimensions & Tires
Wheelbase 105 inches [266 cm]
Weight 12500 lbs [5670 kg]
Front tire -
Rear tire -
Challenger MT485D Power:
Engine gross 135 hp [100.7 kW]
Engine max -
Mechanical
Chassis 4x4 MFWD 4WD
Differential lock -
Steering hydrostatic power
Brakes wet disc
Trailer brakes -
Cab Cab standard with air-conditioning.
Hydraulics
Type III/II
Rear valves -
Mid valves -
Pump flow hydrostatic powe
SCV flow 15 gpm [56.8 lpm] (open center)
(26 gpm [0.0 lpm] (open twin flow)
29 gpm [109.8 lpm] (CCLS)
Total flow -
Electrical
Ground negative
Charging system alternator
Charging amps 175
Charging volts -
Battery
Number 2
Cold-cranking amps 600
Volts 12
Engine Detail
AGCO Power 49AWI
turbocharged air-to-air intercooled diesel
4-cylinder 16-valve
liquid-cooled
299 ci [4.9 L]
Engine specifications
Bore/Stroke 4.251x5.276 inches [108 x 134 mm]
Emissions Interim Tier IV
Emission control selective catalytic reduction (SCR)
Rated Power -
Maximum Power -
Air cleaner dual dry element
Pre-heating thermostart
Compression -
Fuel system electronic high pressure common rail
Rated RPM 2200
Operating RPM -
Torque -
Torque RPM -
Starter electric
Starter volts 12
Oil capacity -
Oil change -
Coolant capacity -
AutoPower IV
Type four speed power shift
Gears 16 forward and reverse
Clutch wet disc
Speeds -
AutoPower VI
Type six speed power shift
Gears 24 forward and reverse
Clutch -
Speeds -
Techstar CVT
Type continuously variable transmission (CVT)
Gears infinite forward and reverse
Clutch -
Speeds -
Challenger MT485D Tires
Ag front -
Ag rear -
Standard tires (ag) -
Dimensions
Weight (operating) -
Weight (max capacity) -
Front axle load -
Rear axle load -
Wheelbase 105 inches [266 cm]
Length -
With hitch Length: -
Width -
Height (hood) -
Height (cab) -
Front axle -
Rear axle Flange Bar: 3.23 by 80 inches [82x2032 mm] Bar: 3.23 by 105 inches [82x2667 mm] Bar: 3.74 by 90 inches [94x2286 mm] Bar: 3.74 by 113 inches [94x2870 mm]
Height (exhaust) -
Clearance (front axle) -
Clearance (rear axle) -
Clearance (drawbar) -
Test name
Test Date August 2013 - September 2013,
Test Type Diesel CVT 4WD
PTO power (max) 136.9 hp [102.1 kW]
PTO fuel use (max) 7.7 gal/hour [29.1 l/hour]
PTO power (rated engine speed) 119.8 hp [89.3 kW]
PTO fuel use (engine speed) 7.2 gal/hour [27.3 l/hour]
PTO fuel use (PTO speed) 7.6 gal/hour [28.8 l/hour]
Drawbar power (max) 87.9 hp [65.5 kW]
Drawbar fuel use (max) 6.9 gal/hour [26.1 l/hour]
Drawbar pull (max) 13850 lbs [6282 kg]
Max pull gear 3.62KPH
Test name
Test Date February 2014 - March 2014,
Test Type Diesel AutoPower IV 4WD
PTO power (max) 136.5 hp [101.8 kW]
PTO fuel use (max) 7.8 gal/hour [29.5 l/hour]
PTO power (rated engine speed) 119.4 hp [89.0 kW]
PTO fuel use (engine speed) 7.4 gal/hour [28.0 l/hour]
PTO fuel use (PTO speed) 7.7 gal/hour [29.1 l/hour]
Drawbar power (max) 99.0 hp [73.8 kW]
Drawbar fuel use (max) 7.2 gal/hour [27.3 l/hour]
Drawbar pull (max) 12350 lbs [5601 kg]
Max pull gear 1D